Robot Pool Cleaner: Step-by-Step Guide to Maintaining Your Robotic Pool Cleaner for Optimal Performance
Maintain your robotic pool cleaner for years and years of reliable and efficient usage! No matter if you have a pool vacuum robot for backyards or that pool robot cleaner for luxury home installations, keep the vacuum to robot frequency in mind. This checklist will guide you through how to take care of your pool robotic pool cleaner and improve its performance every swimming season.
How I clean it, step 1 – Rinse the thing out after every use
Take your robot pool cleaner out of the water after every cleaning cycle. Wash down the surface and tracks to remove any dirt or pool chemicals. If it sits underwater too long, it can cause it to wear out fast, especially for a brand like Maytronics pool cleaner or the newer models like Beatbot’s range.
This practice keeps chlorine precipitation at bay and facilitates the visual inspection of elements such as brushes and filters.
Step 2: Clean the Filter Cartridge or Bag
A filter that’s clogged restricts suction and places strain on the motor. Open the filter housing and wash the filter with a garden hose until the water is clear. If you have a fine mesh or cartridge system for the pool vacuum, rinse it thoroughly once a week during the months of regular use.
For tougher grime, such as algae (especially if you’re executing a pool vacuum for algae operation), you might want to soak the filter for a while in a mild vinegar solution before rinsing.
See also: The Future of Human Capital: Building Agile and Resilient Workforces
Step 3: Examine Brushes, Tracks, and Wheels
Tired and worn looking brushes and damaged tracks will not allow your wall climbing pool cleaner to reach the waterline. Check and clean these parts monthly, detangling hair, leaves or twigs. Most top brands are compatible and you can replace your Beatbot AquaSense 2 Ultra, Beatbot AquaSense 2 Pro, or Beatbot AquaSense 2 with these.
Robotic Pool Cleaners Good for Algae So yes. A well-maintained brush is gives every robot what they need to answer the question: will a pool robot pick up algae? — If it is well kept, yes.
4- Check the Power Supply and Cord (if you have it)
If you’re not using a cordless model, make sure to inspect your power supply for any signs of moisture or corrosion. Straighten the cable, uncoil and distribute the cable to prevent any kinks or memory loops. This feature helps to keep the robot pool cleaner on move and eliminate that irritating cleaning stoppage.
Step 5: Stow Your Cleaner Away Correctly
DO NOT leave your robot pool cleaner under the sun or exposed in excessive cold temperatures. Then store it in a shady, dry place —ideally on a caddy made for your model. This helps the electronics and plastic housing last longer.
Don’t store it with your skimmer or pool booster pump equipment where it could be splashed with water or chemicals.
Step 6: Deep Cleaning Seasonally Thinkstock Clean the radiators in your home.
Deep clean at the end of the season. Take the cleaner apart to clean inside parts. Maintain if necessary If you need to do some pool maintenance like how to acid wash pool or how to drain an inground pool without a pump, clean your robot after to ensure that no residual chemicals are left.
Bottomline is that a properly maintained robot pool cleaner will provide you with years of easy and powerful pool cleaning. Be it fitted to replace your existing pool vacuum or above ground pool vacuum cleaner, using it with your vacuum units or skimmer systems to create a powerful cleaning effect, the pool cleaner also features a top leading air system for significant improvement in suction power, with it also allowing the easy control and prevention of air of getting in the system. It’s easier than ever thanks to brands you can trust and units that lead the industry in terms of innovation, such as the popular Beatbot AquaSense 2 Ultra, Beatbot AquaSense 2 Pro and Beatbot AquaSense 2 that have been designed with easy maintenance in mind.
